SAMA5D33 评估套件

GY@艳

The SAMA5D33-EK is a full-featured evaluation platform for the Atmel SAMA5D33embedded microprocessor. The kit consists of a main board, a computer module equipped with a SAMA5D33 ? ?processor, and a display module. It is supported by the SAMA5D3 Softpack, a free set of bare metal C examples, and is delivered with on-board demos for Linux and Qt-based GUI. The SAMA5D33-EK allows users to extensively evaluate, prototype and create applications that require graphics, audio, mass storage, networking, connectivity and more.Source files and binaries for the on-board demo are available on Linux4SAM, the entry point to open source solutions for Atmel ARM? core-based embedded microprocessors.关键特性

       

• Atmel SAMA5D33 embedded MPU running at 536MHz in a BGA324 package       
  
• 4Gb DDR2, 2Gb NAND Flash, 128Mb NOR , 32Mb SPI Serial DataFlash, 512Kb EEPROM       
  
• JLink and CDC on-board, optional JTAG test access port       
  
• RGMII Ethernet 1Gb w/PHY       
  
• Four-wire RS232       
  
• Two USB 2.0 Hosts, one USB 2.0 Host/Device       
  
• Conexant CX20548 SmartDAA for soft modem implementation       
  
• MicroSD card slot       
  
• MMC/MMC+/SD/SDIO/CE-ATA       
  
• Headphone output, line in and microphone       
  
• One 5.0” WVGA resistive TFT LCD module with four QTouch keys       
  
• One ISI interface for connection to a CMOS sensor       
  
• One HDMI interface       
  
• One 10-pin connector for Atmel RZ600 ZigBee? module