LPC4088评估板

白小白_3003415

恩智浦研发的LPC408x/7x ARM Cortex-M4 MCU是一个数字信号控制器，其嵌入式应用程序需要一个高集成度、低功耗环境。ARM Cortex-M4是下一代的核心，提供系统的增强功能，如低功耗，调试功能的增强，并支持高水平块集成。在LPC408x/7X增加了一个专门的闪存加速，能够在闪存执行代码时实现最佳性能。LPC408x/7X的外设包括高达闪存程序存储器512KB，高达96KB?SRAM数据存储器，高达EEPROM数据存储器，外部存储器控制器（EMC），LCD，以太网，USB设备/主机/4032字节OTG，SPI闪存接口（SPIFI），一个通用DMA控制器，五个UART，三SSP控制器，三个I?C总线接口，一个正交编码器接口，4个通用定时器，两个通用的PWM每六个输出和一个电机PWM控制，超低功耗RTC有单独的电池供应和事件记录，一个窗口看门狗定时器，一个CRC计算引擎和最多165个通用I/ O引脚。模拟外设包括一个8通道12位ADC，两个模拟比较器和一个DAC。产品特性

       

• Functional replacement for LPC23xx/24xx and LPC178x/7x family devices       
  
• ARM Cortex-M4 processor, running at frequencies of up to 120MHz       
  
• 512kB on-chip flash program memory with In-System Programming (ISP) and In-Application Programming (IAP) capabilities       
  
• Up to 96kB on-chip SRAM       
  
• Up to 4032 byte on-chip EEPROM       
  
• LCD controller, supporting both Super-Twisted Nematic (STN) and Thin-Film Transistors (TFT) displays       
  
• External Memory Controller (EMC) provides support for asynchronous static memory devices such as RAM, ROM and flash, as well as dynamic memories such as single data rate SDRAM       
  
• Eight channel General Purpose DMA controller (GPDMA) on the AHB multilayer matrix that can be used with the SSP, I?S, UART, CRC engine, Analog-to-Digital and Digital-to-Analog converter peripherals, timer match signals, GPIO, and for memory-to-memory transfers       
  
• Quad SPI Flash Interface (SPIFI)       
  
• Ethernet MAC with MII/RMII interface and associated DMA controller       
  
• USB 2.0 full-speed dual port device/host/OTG controller       
  
• Five UARTs with fractional baud rate generation, internal FIFO, DMA support, and RS-485/EIA-485 support       
  
• Three SSP controllers with FIFO and multi-protocol capabilities       
  
• Three enhanced I?C-bus interfaces       
  
• I?S (Inter-IC Sound) interface for digital audio input or output       
  
• CAN controller with two channels       
  
• SD/MMC memory card interface       
  
• Up to 165 General Purpose I/O (GPIO) pins       
  
• Two external interrupt inputs configurable as edge/level sensitive       
  
• Four general purpose timers/counters       
  
• Quadrature encoder interface       
  
• Two standard PWM/timer blocks       
  
• One motor control PWM       
  
• Real-Time Clock (RTC) with a separate power domain       
  
• Event Recorder that can capture the clock value when an event occurs on any of three inputs       
  
• Windowed Watchdog Timer (WWDT)       
  
• CRC Engine block can calculate a CRC on supplied data using one of three standard polynomials       
  
• 12-bit Analog-to-Digital Converter (ADC)       
  
• 10-bit Digital-to-Analog Converter (DAC)       
  
• Four reduced power modes: Sleep, Deep-sleep, Power-down, and Deep power-down       
  
• Brownout detect with separate threshold for interrupt and forced reset       
  
• On-chip Power-On Reset (POR)       
  
• On-chip crystal oscillator with an operating range of 1MHz to 25MHz       
  
• 12MHz Internal RC oscillator (IRC)       
  
• Unique device serial number for identification purposes       
  
• Single 3.3V power supply (2.4V to 3.6V)       
  
• Temperature range of 40?C to 85?C       
  
• Available as LQFP208, TFBGA208, TFBGA180, LQFP144, and LQFP80 package