KIT10XS3535EVBE评估板

ladou

KIT10XS3535EVBE评估板支持10XS3535的开发，设计用于低电压汽车和工业照明应用。The KIT10XS3535EVBE Evaluation board supports the 10XS3535, which?is designed for low-voltage automotive and industrial lighting applications. Its five low RDS(ON) MOSFETs (three 10mΩ, two 35mΩ) can control the high sides of five separate resistive loads (bulbs, Xenon-HID modules and LEDs). Programming, control, and diagnostics are accomplished using a 16-bit SPI interface (3.3V or 5.0V). Each output has its own PWM control via the SPI. The 10XS3535 has highly sophisticated failure mode handling to provide high availability of the outputs. Its multiphase control and output edge shaping improves electromagnetic compatibility (EMC) behavior.
Features

       

• Triple 10mΩ and Dual 35mΩ high side switches       
  
• 16-bit SPI communication interface with daisy chain capability       
  
• Current sense output with SPI-programmable multiplex switch and Board Temperature Feedback       
  
• Digital diagnosis feature       
  
• PWM module with multiphase feature including prescaler       
  
• LEDs control including accurate current sensing and low duty-cycle capability       
  
• Fully-protected switches       
  
• Over-current shutdown detection       
  
• Power net and reverse polarity protection       
  
• Low-power mode       
  
• Fail mode functions including autorestart feature       
  
• External smart power switch control including current recopy