Dual SFP+ FMC Module

ladou

Vita 57提供了一个对于I/O中等模块的机械标准，这一标准引入了应允许前面板 IO IEEE 1101因子卡通过夹层板配置的方法。Vita 57 modules have fixed locations for serial/parallel IOs, clocks, Jtag signals, VCC, and GND. HiTech Global's Vita 57 modules can be plugged into any Vita 57 based boards.The FMC standard specifies Samtec’s SEARAY? connector set. The VITA 57 SEAM/SEAF Series system provides up to 400 I/Os in a 40 x 10 configuration or 160 I/Os in a selectively loaded 40 x 10 configuration, in 8.5mm and 10mm stack heights.

FPGA To FMC Interface

The 10G TOE + 10G MAC IP cores shown by the below block diagram are available for evaluation and licensing. The evaluation package is available with the HTG-V6-PCIE-L240 board and HTG-FMC-SFP-PLUS module.

特性? x2 SFP+ Connectors - Supporting 1Gbps or 10Gbps data rates? EEPROMs? FMC Connector? On-board 156.25Mhz and 125Mhz clocks?XAUI interface to carrier card's FPGA