MSP430 USB 调试接口

weiweizsz_30000

? MSP-FET430U14 是强大的闪存仿真工具，能快速开始MSP430 MCU的应用开发。It includes USB debugging interface used to program and debug the MSP430 in-system through the JTAG interface or the pin saving Spy Bi-Wire (2-wire JTAG) protocol. The flash memory can be erased and programmed in seconds with only a few keystrokes, and since the MSP430 flash is ultra-low power, no external power supply is required.The debugging tool interfaces the MSP430 to the included integrated software environment and includes code to start your design immediately.? The MSP-FET430UIF development tools supports development with all MSP430 flash devices.

特性

       

• USB debugging interface (MSP-FET430UIF) connects a flash-based MSP430 MCU to a PC for real-time, in-system programming and debugging       
  
• Technical specifications:
  
         
  
  • Software configurable supply voltage between 1.8 and 3.6 volts at 100mA       
    
  • Supports JTAG Security Fuse blow to protect code       
    
  • Supports all MSP430 boards with JTAG header       
    
  • Supports both JTAG and Spy-Bi-Wire (2-wire JTAG) debug protocols
    
  
  

包含项目

       

• One 14-conductor cable       
  
• One MSP-FET430UIF interface module       
  
• One MSP430 CD-ROM       
  
• One READ ME FIRST document       
  
• USB Cable
  

The USB Debugging Interface is compatible with IAR Version 3.21 or higher.

下载连接:
MSP430硬件工具用户指南