R0K5R8C34DK2PBR评估板

weiweizsz_30000

该评估板装有R8C/34系列MCU，所以他适用于软件开发和USB 外围器件的应用评估。(This Evaluation Board can be used when you are considering about R8C/34U Gropu MCU, 3MK Group and 3MU Group.)Notice

	This product does not bundle with the power supply and the development tools. Prepare the following items before using this evaluation board.
	- Power Supply 5V and 3V- R8C Family C/C++ Compiler Package- E8a emulator

Features

       

• This Evaluation Board has USB mini B receptacle and USB VBUS control IC, so it is available for USB Peripheral device.       
  
• Mounted the connector for the E8a emulator manufactured by Renesas Electronics Corp.       
  
• This board has LCD module, LEDs, user switches as user I/F, so it is suitable for debug and functional evaluation.       
  
• MCU ports are extracted to the board surface as test pins, ｔhis board enables the connection of external devices.       
  
• The sample programs for USB function and each module of MCU are provided, you can immediately begin software development and functional evaluation.       
  
• Attached the circuit diagram and the parts list, it is useful as a reference of circuit design and debug.
  

SpecificationItemSpecificationMCU

       

• R5F2134CKNFP(R8C/34KGroup), Flash ROM:128KB/Data ROM:4KB/RAM:10KB
  

USB

       

• USB2.0 Function module (full-speed Peripheral function)
  

Debug Function

       

• On-chip debug function with connection to E8a emulator
  

User I/F

       

• RS-232C D-sub9 pin connector       
  
• Character-type LCD: features 8 characters x 2 lines( direct control from the general-purpose I/O ports of MCU)       
  
• 4 switches with A/D voltage detection       
  
• 3 LEDs (direct control through general I/O ports)
  

MCU port test pin

       

• 17 pins (A protection circuit or a pull-up resistor are mounted on the board for some of pins)
  

Operating Voltage and Supply Source

       

• main power supply voltage range： 5.0V(4.0V～5.5V) / 3.3V(3.0V～3.6V) *1       
  
• supply source: Stabilized power supply/E8a supply source/VBUS(USB Host)
  

Accessory

       

• Power supply cable (incl. 2P connector)
  

External Dimensions

       

• 100mm x 65mm (not including protruding areas)
  

*1:When the main power supply voltage is 3.3V, supply additional power (5V) to LCD, USB Host Vbus.

下载连接:
R0K5R8C34DK2PBR硬件使用手册